|
|
|
Who's Online
There currently are 6043 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Print was clear and easy to read. Thank you Joe joeoldaudio
;
Very great deal. In a few minutes a have the manual, that I needed. Thanl you very much
;
Manual was complete. Received it quickly. No problems
;
Product was very good. Received quickly and complete
 ;
The Sony AV-3600 service manual was what I needed for the repair of this unit
Thanks for the good service
Dave
2-10
Confirming timer programs If a power failure occurs during the Timer Program Recording (continued) timer program recording Press PROG while timer recording. � When a power failure has occurred, �-:-�
Reference Information
The Move to the next using FF, and set PROGRAM SET UP PRESET screen for confirming will appear. appears in VCR display. Since the
2 5 8/30 -:SLP -/--:2 5 8/30 9:30 10:00 M SP
P
the recording date using PLAY or CH DATE On OFF SPD programmed contents have been cleared, STOP. reset the clock and timer programming.
-/--:CH DATE On OFF SPD -/--:-
5
PROGRAM SET UP PRESET
The date changes as follows: � When power has failed for a short time, the the clock.
-/--:-/--:-
-/--:-/--:-
RECORDING
� -/--:8/25 9/25 7/25 WKLYSU � colon of the current time display blinks. The MO~FR WKLYSA � -/--:E n D : PROG -/--:-
programmed contents are not affected. Reset
� [WKLYSU] [WKLYSA]: You can record TV programs Eon Dthe :same PROGn channel on the day and time every week. Overlaps of the programs [MO~FR]: You can record TV programs same channel on the day and time Monday through Friday. This screen can be sure only in the Timer Recording mode. If two timer programs overlap, the recording start time of program 1 has priority over the recording
PROGRAM SET UP PRESET
6 Move to the next using FF, and set off time of program 2. Changing/cancelling the timer
recording start time.
2 5 8/30 9:30 M -:SLP -/--:-/--:-/--:-/--:-/--:P
hour and minutes of the CH DATE On OFF SPD programs
(Start time) (Start time)
E n D : PROG Overlapped portion
1) If TIMER indicator is lit, turn the VCR on by Program 1 pressing POWER. Program 2 2) With steps 2 to 9, change the items.
To cancel a program, select the program you
7 Move to next, and set the The line is then cleared.
mode.
2 5 8/30 9:30 10:00 M SLP -/--:-/--:-/--:-/--:-/--:P
(not recorded) want to cancel in step 4, and press CANCEL.
PROGRAM SET UP PRESET
recording off time. CH DATE On OFF SPD 3) Press POWER return to the timer standby
E n D : PROG
Error indication
The blinking �TIMER� indicator appears in the VCR display if you press both TIMER when: Move to next, and select the
PROGRAM SET UP PRESET
P P
CH DATE On OFF SPD
-/--:-/--:-/--:-/--:-
�� a cassette is not loaded. In these cases, a recording can not be made. For the tape speed �AUTO (Auto Speed Select)�, see below.
EnD : PROG
8
2 5 8/30 9:30 10:00 M SP
tape speed (SP) using PLAY or STOP. �� the loaded cassette has no safety tab.
-/--:-
To set another program, press FF, and select the next line pressing STOP.
Repeat steps 4 to 8.
9 Press PROG..
REC TIMER
Now programming is completed.
Press both TIMER simultaneously.
TIMER Hi-Fi
10
STEREO
L SAP
The power turns off and the VCR enters
the timer standby mode.
� Make sure that the tape length is selected correctly
Auto Speed Select Notes
If you are not sure the tape is long enough for according to tape used on the SET UP screen . timer program recording in the SP tape speed, � When SLP speed is selected and the tape set the recording tape speed to �AUTO�. length is not sufficient record program to the Recording starts in SP tape speed and end, program cannot be recorded to the end. VCR automatically selects tape speed to � The picture will be distorted when playing the part record program to end. If the tape length where the recording tape speed is switched from
SP to SLP with the Auto Speed Select feature. is not long enough, the tape speed automatically
changes from SP to SLP.
Toshiba
26 27
|
|
|
> |
|
