Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 13 (click to view)
REMOVING THE FILTER
WHEN SHOULD I REMOVE THE FILTER?
Check the filter two or three times a year and clean it if necessary. � Check the filter if the appliance is not draining properly or if it fails to perform spin cycles. � Remove the filter if the pump is blocked by an object (buttons, coins, safety pins, etc.). IMPORTANT: make sure the water has had time to cool before draining the appliance.
REMOVING THE FILTER
1. Switch off the appliance and unplug it. 2. Remove the coloured insert from the detergent dispenser and use it to open the filter cover. 3. Place a bowl beneath the filter. 4. Turn the filter slowly anti-clockwise until the grip is vertical; do not extract filter as yet. 5. Wait until all the water has drained out. 6. Now unscrew the filter completely and extract it. 7. Remove any foreign material from the filter. 8. Make sure the pump impeller is not obstructed. 9. Insert the filter and screw it fully down in a clockwise direction (until the grip is horizontal). 10. Close the cover. 11. Pour 0.5 l of water into the detergent dispenser to reactivate the �Eco System�. 12. Connect the appliance to the electrical outlet. 13. Select a programme and start it.
