I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
Excelent service, the manual is complete, very cheap and fast
Alberto
Text excerpt from page 38 (click to view)
Alignment & Adjustment
3-4-2 Adjusting the Picture Straight Lines
â� Display the Cross Hatch pattern.
� Adjust settings other than V-AMP, V-SHIFT, H-AMP and H-SHIFT so that straight lines are displayed without curves. � Adjust BOW and the Angle settings so that the center line becomes a straight line. � Adjust the H-Parabola and H-Trapezium settings so that the left and right lines become straight.
� Adjust the Upper Corner and the Low Corner settings so that the end of the lines become straight.
� Adjust the V-Linearity and V-SC settings so that the intervals of the horizontal lines become uniform.
� When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed. If there is no change, finish the adjustments.
