Chassis and DM Module Removal
The chassis and DM Module can be removed as a single unit. 1. Undo the cable wire ties to the Front Panel, Speakers, CRTs, etc. 2. Remove screw (a) securing the Main Chassis [and screws (b) in model WS-65712] . 3. Release the Chassis Locks on each side of the chassis. 3. Slide the Chassis and DM Module out the rear of the unit. 5. Tilt upward to access the bottom of the main chassis. NOTE: If the chassis cannot be removed with the DM Module, due to insufficient cable length: 1. Perform Step 1 through 3 above. 2. Remove 1 screw (c). 3. Slide the chassis only out the rear of the unit. Page 22
