The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
Very fast, clear and usefull site !
Also this Service Manual are very well maked and with a very good definition !
Very fast download speed !
Recomended Seller !
The Technics manual was very clear and I was able to solve my technical problems.
I did not think that anyone kept these manuals and was pleasantly surprised to find them on the Internet and at an affordable price.
I would recommend Owner Manuals as a first source of technical products for ‘dated’ equipment manuals.
Ian
Text excerpt from page 90 (click to view)
XR-A9800D
14 Release the All Connectors from DVD MAIN Assy. 15 16 15
HOW TO EXCHANGE THE FUSE (PRIMARY ASSY) 1
Remove a Bonnet (Eleven screws).
17 � 2
Unhook
DVD MAIN Assy
18 17
DVD Base CONNECT Assy (6 CH)
$M DVD Mecha Unit
2
19 Return the $M DVD Mecha Unit only to the body. 20 Connect the connectors which disconnecting from the
connectors as step 14 excepting CN6.
�3
3
Remove the PRIMARY Assy.
21 Perform the wiring as follows, and perform the diagnosis.
DVD MAIN Assy Insulation sheet
$M DVD Mecha Unit
CN5104 CN8103
PRIMARY Assy
CONNECT Assy (6 CH)
AF Assy FU1 Put it on the stand.
The two FFC cable of $M DVD Mecha Unit interferes with Loading Tray when it is movable. Please fixes the FFC cable to AF Assy with the tape so as not to interfere.
