5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
very helpful, the information in these manuels are very detailed
Text excerpt from page 4 (click to view)
B A B A
English
B E F O RE S T A R T I N G
C
D
1 a Ensure that the machine�s carrying handle is folded down. Then open the front cover on the machine and check that the dust bag, s-bag�, and the motor filter are in place. 1a 1b 2 1 b Fold up the carrying handle until it clicks into place. Then open the back lid on the machine and check that the exhaust filter is in place. 2 3 Insert the hose until the catches click to engage (press the catches to release the hose). Attach the extension tubes or telescopic tube (certain models only) to the hose handle and hard floor nozzle by pushing and twisting together. (Twist and pull apart to dismantle.) Extend the electric cable and connect it to the mains. The vacuum cleaner is fitted with a cable winder.
4
3
4
5 a Press the foot pedal to rewind the cable (take hold of the plug to prevent it striking you). 5 b Press the small button on the pedal to activate Autoreverse (on certain models only). The length of the cable will now be continually adjusted to requirements. Press the whole pedal to de-activate Autoreverse. The cable is now fixed, as on a normal cable winder. 6 7 Press the On/Off button with the foot to start the vacuum cleaner. Adjust suction power using the suction control on the vacuum cleaner or the suction control on the hose handle. A practical parking position (and at the same time a backsaving feature) when you pause during cleaning. A parking position which makes it easy to carry and store the vacuum cleaner.
8 9
10 a When you want to carry the vacuum cleaner, lift the carrying handle until it clicks into place. 10 b You can also carry the vacuum cleaner using the handle on the lower front edge of the machine. 5a 5b 6 7
