NOVATION ZERO SL
Quick Start

LCD SCREEN
BUTTONS

X
INCREASE X INCREASE X/ DECREASE X

ENCODERS

BUTTONS

DECREASE X

POTS

INCREASE X/ DECREASE X

CONTROLS THAT EFFECT X

Press the SCROLL UP/DOWN keys to the left of the screen to move to the additional edit page(s) for each control. The DATA/TEMPO encoder is inactive in this mode. TEMPLATE MODE (TEMPLATE COMMON EDIT) Pressing the TEMPLATE button activates the Template Common edit mode, in which the universal settings across all controls within a Template can be modified. Press the SCROLL UP/DOWN buttons to move to additional pages and modify settings using the same means listed above. The SL range has been expanded to allow for further User options with regards to override MIDI channel settings and routing. There are now two (universal) options for each control (in addition to the full range of individual options): COMMON and PROGRAM (Routing for Prog/Bank Change data). Any control now has the option of using the COMMON or PROGRAM MIDI channel and the COMMON or PROGRAM routing setting. Within each factory Template, controls can be set to COMMON or PROGRAM, as well as assigned an individual MIDI channel or routing option, to allow for quick changes to multiple controls simultaneously. The COMMON and PROGRAM MIDI channel and routing can be set within the pages in this (TEMPLATE) Mode. (See User Guide for full details.) GLOBAL MODE (GLOBAL EDIT) Pressing the GLOBAL button activates the �Global� edit Menu pages. These are �General Parameters� pages, where the main ZeRO SL settings such as Memory protect, port routing and display timeout can be defined. Press the SCROLL UP/DOWN buttons to move to additional pages and modify settings using the same means listed above. The facility to update the Operating System and receive/dump Templates is found within the �General parameters� pages in GLOBAL Mode. Press the GLOBAL button followed by the SCROLL UP button (repeatedly) to the left of the LCD screens to access. To adjust the contrast of the screens, press the GLOBAL button once and then use the first or last encoder or pot to set the left and right screen value, respectively, between 0 and 15. The GLOBAL memory protect must be off to save this setting. Press the left scroll up button (next to the left screen) once, then use the first encoder/ pot/button to set memory protect to OFF. Once this is done, the WRITE button can be used to save GLOBAL settings.

5
FA0085-01 Rev - 1.0