as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
Exactly as described, the full user-manual (145 pages). Perfect.
Text excerpt from page 14 (click to view)
INSTALLING THE COOKER HOOD
Rear Splashback (Optional)
The splashback comes in two parts, the back panel and the top profile, which fits between the top of the splashback and the underside of the hood. The splashback and the profile must be fitted before fixing the canopy. Installation is rather complex and should be undertaken by the kitchan installer or a qualified person.
Fitting the Splashback
Place the the splashback on the worksurface having first inserted the lower flange between the wall and the worksurface. Ensure the splashback is located centrally with the vertical line on the wall. Mark the centres for the two fixing screws in the upper flange. Drill the holes marked on the wall using a �8mm drill-bit. Place the top profile item 20 onto the top flange so that the holes in the profile align with those in the splashback Fix the profile and splashback to the wall close the holes using the plugs item 13.
20-
-
13
-
Fitting the Canopy Hood
Before starting to fix the canopy, tighten the two screws Vr located on the canopy mouiunting brackets. Hook the canopy onto the screws (not supplied). Tighten up the screws. Adjust the screws item Vr to level the canopy.
Vr
