Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
The manuel was exactly what I needed and I received it promptly. Thanks
Text excerpt from page 5 (click to view)
�LED� PROGRAMMER (Fig. 5A) Features 24 hours clock with automatic programme and minutes counter. Functions Cooking time, cooking end time, clock, minutes counter, times to be set up to 23 hours 59 minutes. Manual selection. Display 4-figures, 7-segments diplay for cooking times and time of day. Display for identification of timer conditions: Automatic setting =A Time and manual use Minutes counter = saucepan symbol = bell symbol
Fully automatic use Press the cooking time button and select the length of the cooking time with +/-. The A symbol appears. The relay switches on and the saucepan symbol appears. By setting the cooking end function, the next cooking end time appears. Set the cooking end time with +/-. The saucepan symbol appears again when the time of day corresponds to the cooking start time. When the automatic programme is over, the A symbol flashes. The sound signal rings, the saucepan symbol and the relay switch off. Minutes counter Press the minutes counter button and set the cooking time with +/- button. The bell symbol lights up when the minutes counter is operating. When the set time is up, the sound signal rings. Sound signal The sound signal (0.5 Hz) rings at the end of a programme or of the minutes counter function and it lasts for 7 minutes. To stop it, push the button 1. Start programme and check The programme starts after the required time has been set. The programme can be checked at any time by pressing the corresponding button. Setting error A setting error is made if the time of day on the clock falls within the cooking start and end times. When an error occurs, the sound signal rings and the A symbol flashes. To correct the setting error, change the cooking time and cooking end time. Cancelling a setting To cancel a setting, press the manual function. A set programme will automatically cancel on completion.
Fig. 5A 1 Minute timer 2 Cooking time 3 Cooking end
1 2 3 4 5
A
4 Subtract time 5 Add time
Setting After pressing a function button the time required can be set with the +/- buttons. The counting-up and counting-down speed increases when the buttons are held down. If a function button is just briefly touched and released, the selected function is displayed for 5 seconds. Within this time setting may be commenced. Five seconds after releasing the function button or after setting is completed, the display reverts to time of day. When a programme has been set, it starts immediately. Selection of a function is accompanied by a sound signal. Setting the time Press the cooking time and the end time simultaneously, and set the time with +/- buttons. This deletes any previously set programme.
Manual use By pressing simultaneously 2 and 3 buttons (the automatic symbol will be erased), the saucepan symbol lights up. This deletes any previously set programme. Semi-automatic use with cooking time setting Press the cooking time button and set the desired time with +/-. The saucepan and A symbol appear. The relay switches on immediately. When the cooking end time corresponds to the time of day, the relay and the saucepan symbol switch off. The sound signal rings and the A symbol flashes. Semi-manual use with end time setting Press the end time button and set the desired time with +/-. The saucepan and A symbol light up. The relay switches on. When the cooking end time corresponds to the time of day, the relay and the saucepan symbol switch off. The sound signal rings and the A flashes.
