Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 6 (click to view)
Measuring the temperature
If the temperature is measured using a standard, single thermometer, this should be put in a glass of water centrally placed inside the cabinet. This will reflect the temperature inside the food products. Do not place the thermometer hanging or lying directly on the shelf.
· · · ·
Distribute foodstuffs to allow cold air to circulate freely between the products. Do not place food products directly against the cooling plate on the rear wall since they may freeze in this case. Also never put warm products into the cabinet. Wait until they have cooled down. Cover all foods properly to avoid odours and flavours from tainting other food.
Switching off
Set the thermostat control to the "0" position. Unplug the power supply plug from the wall socket.
Cabinet interior
The shelves and door compartments are removable and can easily be re-arranged. Certain shelves must be lifted up by the rear edge to enable them to be removed. The lower door compartment and the glass shelf above the salad drawer must not be moved. They are required for proper air circulation inside the cabinet. Shelves with a raised edge should be placed with the raised edge facing the rear wall of the cabinet, and thus prevent food products from touching the cooling plate. Dividing plate The dividing plate separates the chiller compartment from the fridge. The dividing plate features a grille that can be opened and closed to control the amount of cold air entering the chiller compartment. When the grille is opened, the chiller compartment will become colder. In fridges with a single door, the dividing plate can be moved to increase the size of the refrigerator compartment. The dividing plate should always be placed under the drip channel and opposite a door compartment.
