perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 10 (click to view)
7. Select the spin speed or the Rinse Hold option
Press the �Spin� button repeatedly, in order to select the desired spin speed or the �Rinse Hold� option. The relevant light will light up. If you select the Rinse Hold option, the machine will stop at the end of the programme with the water still in the tub. ZWF 1241 W
1200 900 700 500 Rinse Hold
9. Start the programme
Press the �Start/Pause� button. The relevant light will stop flashing and only the light relevant to the phase that is in progress will remain lit.
Start/ Pause
ZWF 1441 W
1400 900 700 500 Rinse Hold
Spin
Spin
10. How to change an option or a programme during its cycle
Before you make any change, you must pause the machine by pressing the �Start/Pause� button. It is possible to change the temperature or any option before the programme carries it out. Changing a running programme is possible only by cancelling it and selecting a new programme. The machine will resume the cycle from the beginning and the washing water in the tub will not empty out. If it is necessary to drain the water, proceed as follows: � PAUSE the machine by pressing the �Start/Pause� button; � press the �Skip/Reset� button repeatedly, until only the �Drain� light remains lit; � press the �Start/Pause� button again. You may now select a new programme and press the �Start/Pause� button to start it.
8. Select the desired options
If your laundry is heavily soiled, it may be advisable to select the �Prewash� option. If your laundry is lightly or normally soiled and it is necessary to prolong the washing time, select the �40°AA� option. The relevant light illuminates.
Prewash 40° AA Half Load
11. How to cancel a programme during its cycle
To cancel a programme that is being carried out, first pause the washing machine by pressing the �Start/Pause� button, then press the �Skip/Reset� button repeatedly, until the phase indicator lights go out.
